Skip to content
AI-generated illustration of a cat drinking from a ceramic pet fountain.
AI-generated editorial illustration; product appearance may differ.

PetSafe Drinkwell Pagoda: Fountain and Replacement-Part Guide

Back to Feed

As an Amazon Associate I earn from qualifying purchases.

The PetSafe Drinkwell Pagoda is model PWW00-13907, a 70-ounce ceramic fountain with an open, multi-level bowl and two free-falling streams. PetSafe’s own parts list names three replacements for this model: carbon filter #6 (PAC00-13906), foam pre-filter #5 (PAC00-13711), and pump PAC00-13206. Match those part numbers to the label or manual for your fountain; “Drinkwell” by itself is not a compatibility check. [S1]

This guide is for Pagoda owners identifying the fountain or replacing a filter or pump. It compares the two filters’ roles and manufacturer replacement intervals, then gives a model-number checklist. It does not report hands-on testing or claim that a similar-looking Drinkwell part will fit.

Quick answer: For the Drinkwell Pagoda PWW00-13907, PetSafe lists PAC00-13906 carbon filters, PAC00-13711 foam filters, and PAC00-13206 pump. PetSafe says the carbon filter lasts 2–4 weeks and the foam filter 1–2 months; these are manufacturer recommendations, not measured guarantees. [S1][S2][S3]

Contents

Identify the Pagoda model

PetSafe identifies the Drinkwell Pagoda as PWW00-13907. The product listing describes a 70 oz ceramic fountain with an open, tiered bowl and two falling streams. Its listed package contains the bowl and tower, filter components, pump, and power adapter. Those details can help distinguish the Pagoda, but the model number is the strongest check when shopping for parts. [S1]

If the label is missing, compare the fountain with its original manual and the official product information before ordering. Similar names and shared brand labels do not establish that two fountains use the same filter or pump. PetSafe’s model-specific fit list is the basis for the recommendations below.

Pagoda replacement parts at a glance

PartPetSafe numberWhat the official listing supportsManufacturer guidance
Carbon filter #6PAC00-13906Pagoda is included in the named compatible fountain list; the carbon is coconut-shell based and is described as helping remove bad tastes and odors. [S1][S3]Each filter provides 2–4 weeks of filtration. [S3]
Foam filter #5PAC00-13711Pagoda is included in the fit list; the foam catches hair and debris and helps keep the pump cleaner. [S1][S2]Replace every 1–2 months. [S2]
Replacement pumpPAC00-13206PetSafe lists Pagoda among compatible fountains; the listing includes a pump and power adapter. [S1][S4]The page describes it as a plug-in pump; it does not establish adapter interchangeability with other pump SKUs. [S4]

The two filter numbers describe distinct components, not two names for the same insert. The carbon filter is for taste-and-odor filtration, while the foam filter catches larger hair and debris before it reaches the pump, according to PetSafe. The Pagoda product page names both as compatible. [S1][S2][S3]

For shopping, compare the complete part number on the package or listing. You can search Amazon for PAC00-13906 or search Amazon for PAC00-13711; these links show search results, not a specific verified listing or guaranteed fit. Check that the result names the correct SKU and model before buying.

As an Amazon Associate I earn from qualifying purchases.

Carbon filter versus foam filter

Choose PAC00-13906 when you need the Pagoda’s #6 carbon filter. PetSafe lists Pagoda in this filter’s compatible group and says each carbon filter provides 2–4 weeks of filtration. The page describes coconut-shell activated carbon as helping remove bad tastes and odors. That language is the manufacturer’s description; it is not evidence of a medical benefit or a measured water-quality result. [S3]

Choose PAC00-13711 for the Pagoda’s #5 foam pre-filter. PetSafe says this foam catches hair and debris, lists Pagoda as compatible, and recommends replacement every 1–2 months. [S2] The intervals differ, so do not use one filter’s schedule as the schedule for the other. Follow the manual and inspect the parts during routine fountain cleaning; actual conditions can vary with fountain location and use.

A common source of confusion is PAC00-13712, a separate carbon-filter family. PetSafe’s listing for PAC00-13712 names Stainless Multi-Pet and 360 fountains, not Pagoda. The Pagoda page instead names PAC00-13906 for its carbon filter. Do not substitute a 360 filter merely because both are Drinkwell carbon filters. [S1][S5]

Match a replacement pump

For the Pagoda, start with PAC00-13206: it appears on the Pagoda product page’s compatible-parts list, and PetSafe’s replacement-pump page includes Pagoda in its fit list. That pump listing describes the unit as plug-in and includes a power adapter. [S1][S4]

The pump page also names other fountain families. A broad fit list is not a universal promise for every Drinkwell model, and it does not show that adapters can be swapped between pump SKUs. If your fountain is not PWW00-13907, check its own manual or official compatibility listing rather than choosing by appearance or brand alone. The official Pagoda product listing is linked here: PetSafe Drinkwell Pagoda. [S1][S4]

Before you order

Use this short check before adding a replacement part to your cart:

  1. Read the fountain model number. For the Pagoda, look for PWW00-13907.
  2. Identify the part type. The carbon filter is PAC00-13906; the foam filter is PAC00-13711; the pump is PAC00-13206.
  3. Check the complete SKU. Do not rely only on “Drinkwell,” “carbon filter,” “foam,” or a product photo.
  4. Compare the compatibility list. Confirm that it explicitly includes Pagoda or the exact model printed on your fountain.
  5. Check the included power adapter details for a pump. The PAC00-13206 page says an adapter is included; it does not prove that another pump’s adapter is interchangeable.

For broader fountain choices, see the site’s water fountains guide and filters and parts category. If you are comparing feeding products too, browse cat feeders. These are existing site guides; the manufacturer pages remain the source for compatibility claims.

Frequently asked questions

Which filter fits the PetSafe Drinkwell Pagoda?

PetSafe lists carbon filter PAC00-13906 (#6) and foam filter PAC00-13711 (#5) for the Pagoda. Its product page identifies the fountain as PWW00-13907 and names both filters in its compatible-parts information. Match the number on your fountain and replacement package before ordering. [S1]

Is PAC00-13712 the Pagoda carbon filter?

PetSafe lists PAC00-13712 for its Stainless Multi-Pet and 360 fountains. The Pagoda product page names PAC00-13906 instead. These are separate filter families, so use the SKU tied to the exact fountain model rather than assuming all Drinkwell carbon filters fit. [S1][S5]

How often should I replace the Pagoda filters?

PetSafe’s PAC00-13906 page says each carbon filter provides 2–4 weeks of filtration. Its PAC00-13711 page recommends changing the foam filter every 1–2 months. These are manufacturer recommendations, not guarantees of service life; inspect and clean the fountain according to its manual and usage conditions. [S2][S3]

What replacement pump fits the Pagoda?

PetSafe names PAC00-13206 as compatible with the Pagoda. The pump page says the package includes a power adapter and identifies the power option as plug-in. For another Drinkwell model, confirm the exact model’s own part list; do not infer fit or adapter compatibility from the brand name alone. [S1][S4]

Conclusion

For a PetSafe Drinkwell Pagoda PWW00-13907, the documented replacement parts are carbon filter PAC00-13906, foam filter PAC00-13711, and pump PAC00-13206. Keep the carbon and foam schedules separate, and verify the exact model and SKU before ordering. If the fountain label or listing does not match, consult its model-specific PetSafe manual or compatibility page first.

Sources